Press podpressovchik
Cold press for veneer production
This machine is a combination of individual components with a small volume, it is easy to carry and assemble. The veneer sheets are glued together first, the pre-pressing method can shorten the hot pressing time and improve the quality of the plywood. The board is easy to transport and reduces the distance between hot plates.
Press for cold pressing of veneer
The pressure generated by the cold press helps to glue the veneer sheets together, and the finished plywood product is usually cooled and held for a certain amount of time before it is ready for use. The cold press is usually used in conjunction with other machines such as glue spreader and veneer cutter to complete the plywood production process. This is an important piece of equipment that helps ensure the necessary strength and durability of the plywood.
During the production of plywood, sheets of veneer are coated with glue and stacked on top of each other, with the direction of the grain of each sheet changing to increase the strength of the finished product. The stack of veneers is then placed between the cold press plates and subjected to a high level of pressure.
Options prepress press
General pressure |
800t |
Board feeding direction |
From the long side |
Layer quantity |
1 |
Layer space |
1600 mm |
Desktop size |
2700x1370mm |
Cylinder |
Φ320mm*2pcs (master cylinder) |
Stroke length |
800 mm |
Power |
11kW, 380v 50hertz |
Dimensions |
3550x1370x4470mm |
General ve |
10 t |
Frame |
bolted connection |
top/bottom/middle beam |
800/800/400mm |
Our Factory
Certification
At the exhibition
Customer visits
Our services
Pre-sales services:
1. Free consultation on the entire line of plywood production equipment
2.Offer reasonable plan and free design according to customers' special requirements to help choose equipment.
3.Welcome to our factory
Services during sales:
1. Inspection of the machine before leaving the factory.
2.Installation and configuration of equipment abroad
3. Training of first line operators.
After-sales services:
1. Online service 24 hours a day
2.Providing a video with the installation and configuration of equipment
3. Providing technical support (Technical phone: +8619653165764). Service of departure to the client is possible.
Related News
Submitted successfully
We will contact you as soon as possible